Explosion-proof pliers

Many risk situations
A single solution

EXPLOSION-PROOF PLIERS

The responsible choice for safety at work

Explosion-proof pliers offer protection against explosion risks for all operations where hazardous substances are handled. They can be used in all areas where potentially flammable substances are used or where mixtures can generate electrostatic charges. ICMI grounding pliers are special appliances certified according to ATEX Directive. They are available for prompt delivery.

ISEO 1

Grounding to eliminate electrostatic energy build-up.
ISEO 1 grounding contact pliers in

II 2GD Ex db IIC T6 Gb / Ex tb IIIC T85°C Db IP65 Ambient. Temp -20°/+55°C in compliance with standards EN IEC 60079-0, EN 60079-1 , EN 60079-31
(CESI 03 ATEX 101X approval) for potentially explosive atmospheres with the presence of group IIC gases and flammable dusts, equipped with re-opening – tearproof system.
Reliable, sturdy, handy and easy to use, the Iseo 1 pliers are particularly suitable for equipping vehicles, trailers and tanks or for electrically grounding mixing tanks. They easily connect to any handhold, even in the presence of strong oxidation.
Insulation voltage: 3kV – Rated current: 10A

Fuel transfer
The loading and unloading of tankers must be carried out in complete safety.

Transfer of chemical products
Flammable substances are particularly hazardous during transfer.

Mixing
The mixing of particular substances can generate electrostatic charges.

Handling hazardous products
Lifting, dragging and storing are high-risk operations.

ISEO 2

Grounding connected to signalling and control equipment. ISEO 2 pliers with one ground contact and one consent contact for electronic equipment, both in II 2GD Ex db IIC T6 Gb / Ex tb IIIC T85°C Db IP65 Ambient Temp. -20°/+55°C in compliance with EN IEC 60079-0, EN 60079-1 , EN 60079-31 (CESI 03 ATEX 101X approved) for potentially explosive atmospheres with the presence of group IIC gases and flammable dusts Safe, easy to handle and simple to use, the ISEO 2 pliers are the ideal equipment for tanker loading shelters equipped with electronic grounding signalling equipment. They can be easily connected to any handhold, even in the presence of strong oxidation. Insulation voltage: 3kV – Rated current: 10A.

Many risk situations
A single solution